Jabiruyank
Jabiruyank
@jabiruyank
Trusted Member
Joined: Aug 22, 2020
Last seen: Feb 1, 2023
Topics: 18 / Replies: 39
Reply
RE: Cold start jetting

@wyomingeuropa Was Bing support from Bing Agency? Bing Carburetor Home - BING AGENCY INTERNATIONALSOLE DISTRIBUTORFOR BING CARBURETORS AND THROTTLE B...

8 months ago
Topic
Replies: 1
Views: 287
Topic
Replies: 6
Views: 1080
Reply
RE: Jabiru Scimitar Propeller Damage

Greetings Jab support, i just realized ai posted a propeller issue on the airframe topic! Sorry. To answer your question, the affected area does not...

2 years ago
Topic
Replies: 3
Views: 1005
Topic
2 years ago
Replies: 1
Views: 1396
Reply
RE: Hole in Jab Scimitar Propeller

I just realized this is posted in the wrong topic and should be in "Propellers"

2 years ago
Topic
Replies: 1
Views: 1618
Reply
RE: Vibration!!

Greetings Jab support, During balancing of the propeller which included applying enamel paint and sanding off excess weight, I encountered the attac...

2 years ago
Reply
RE: Vibration!!

Greetings Jab support, Arion aircraft has located a used prop flange and crank so I can perform the static balance of the scimitar propeller. The ma...

2 years ago
Reply
RE: Vibration!!

Yes, it did. I changed it as I was only getting 2750 RPM WOT. It was an error on my part as I had the pitch set at 21 degrees. The vibration occurred ...

2 years ago
Reply
RE: Vibration!!

Thanks for the quick reply. Yes, I checked both blades’ pitch. They’re within .1 degrees. Tracking was checked as well and it is at 2mm. Machining a b...

2 years ago
Topic
2 years ago
Replies: 8
Views: 5931
Reply
RE: Jet Sizing

@jabiru-support To use your expression, crikey! The soot accumulation using the 290 with a 235 was super thick in the exhaust pipes! This occurred a...

2 years ago
Reply
RE: Mag Filters For My 2200

@jhmcglynn When I bought the plane, the Garmin SL 40 was inop and I purchased a drop in replacement, Icom A210. I’ve read where some com radios are ...

2 years ago
Page 1 / 4