Notifications
Clear all
Jabiru Engines
2
Posts
1
Users
0
Likes
1,525
Views
Topic starter
23/09/2021 10:35 pm
Greetings Jab support,
During balancing of the propeller which included applying enamel paint and sanding off excess weight, I encountered the attached on the tip of the propeller. The hole is approximately 1/6” in diameter and approximately 4” deep. Please find out from the factory why there is a hole on my Jabiru scimitar propeller blade. I recall on my previous vibration issue posting in February, Jab support mentioned if there wasn’t a hole in the prop about 1/8” in diameter running the axis, all was good. At the time, I hadn’t discovered it but it’s definitely there now.
Cheers,
Alex-
Topic starter
24/09/2021 2:09 pm
I just realized this is posted in the wrong topic and should be in "Propellers"
