Greetings Jab support, During balancing of the propeller which included applying enamel paint and sanding off excess weight, I encountered the attac...

Greetings Jab support, Arion aircraft has located a used prop flange and crank so I can perform the static balance of the scimitar propeller. The ma...

Yes, it did. I changed it as I was only getting 2750 RPM WOT. It was an error on my part as I had the pitch set at 21 degrees. The vibration occurred ...

Thanks for the quick reply. Yes, I checked both blades’ pitch. They’re within .1 degrees. Tracking was checked as well and it is at 2mm. Machining a b...

@jabiru-support To use your expression, crikey! The soot accumulation using the 290 with a 235 was super thick in the exhaust pipes! This occurred a...

@jhmcglynn When I bought the plane, the Garmin SL 40 was inop and I purchased a drop in replacement, Icom A210. I’ve read where some com radios are ...

Hello Jab support, I installed a new mechanical fuel pump, and it looked as if the issue was resolved but the following day, it was doing the same t...

Hello Jab support, I changed the needle back to the original Bing and I still had the same problem; the engine cuts off when I applied more throttle...

Greetings Jab support. I just received 4A138BOD. The Jab is much shorter than the original Bing needle on the CV94 carburetor? Is that correct? See at...

Sorry about the last reply, it was done at 1:30 in the AM. I ordered part number 4A138B0D-2 from Arion Aircraft. The invoice did not have a "-2" thoug...

I ordered P/No. 4A138B0D-2

Greetings Jab support, I installed the Jab needle and now the engine quits when I add power from idle. It seems as if it's starved for fuel. I'll ma...

Greetings Jab support, What position should I place the Jabiru needle? I assume there are position grooves as in the Bing needle? Thanks in advanc...

@jabiru-support Thanks for the quick reply. Are you suggesting then that I should order the current needle? If it’ll help achieve what I’m trying to...