Last seen: Sep 1, 2024
Hello Steve, As far as I know, a time delay shouldn't cause a problem with the cold start. The coil driver runs continuously in other applications.
Hello Borge, We haven't run a propeller that heavy before but don't see a problem with the weight. However it is important that the moment of inert...
Hello Jabiruyank, My understanding is that www.bingcarburetor.com is the Bing reseller in the US. So they obviously have a problem with the liabili...
Hello Borge, How long is the propeller extension you are going to use with the propeller?
The first thing I would do is to remove the exhaust pipe and check for signs of leaking on the sealing faces.
No there isn't a calendar time for overhaul. However for the engine to be serviceable it must have been stored in accordance with the Maintenance Man...
That is an interesting suggestion. We haven't experienced that problem here but it isn't exactly cold here in winter. We'll see if it is somethin...
Hello Alex, It is hard to tell but the mixture does get leaner in cold conditions. Your plane came from florida, if I remember correctly. This may...
Hello Glen, Yes there is. We have a heavier piston available for that engine. Just email us and we should be able to sort you out.
Hello David, It is hard to get an idea of what the problem might be from the information you have given. 100deg -C or F is a lot of difference. Is ...
Hello Alberto, If the sender is shorter it doesn't read the oil temperature properly. If you look for senders with the specifications given earli...
Jabiruyank, Can you send us an email at info@jabiru.net.au and we'll sort something out.
Hello Alex, You can try drilling out the choke jet to 1.2mm and see if it helps. And yes it is the same cold start kit as in CS01. Have no ide...
Hello MongerS, The normal procedure is to tie the tie down ropes loosely around the upper end of the wing struts and through the hole in the ventral...
Hello Alex, That is definitely not a Jabiru part. We have a carburettor heat exchanger that goes on the main muffler body and our cabin heat exchan...