Jabiru Support
Jabiru Support
@jabiru-support
Admin
Member
Joined: Jun 25, 2020
Last seen: Jan 23, 2023
Topics: 1 / Replies: 149
Reply
RE: Replacing the Induction Pipe O-Ring

You should be able to hook it out with an O ring pick or a similar pointed object.

2 months ago
Reply
RE: Jabiru Builder in USA

@shawnk The parts are manufactured in Australia. If you are a USA customer we will refer you to the Jabiru Dealers in the USA. Jabiru Support

2 months ago
Reply
RE: Engine whine

Send an email to info@jabiru.net.au and we will see if we have something helpful for you.

2 months ago
Reply
RE: Cold start jetting

No it will not.

3 months ago
Reply
RE: EarthX Lithium Battery With Jab 3300 in a Sonex

Hello, This was not a service bulletin. However it is in the current Gen 4 installation manual in section 4.6. /p>

3 months ago
Reply
RE: Cold start jetting

Good to hear that you are having success.

3 months ago
Reply
RE: Engine whine

Glad I could assist.

4 months ago
Reply
RE: Cold start jetting

If it starts on the choke it can take 5 mins or more, depending on the temperature, to warm up enough to run without choke. It is normal to start w...

4 months ago
Reply
RE: Engine whine

Hello Chuck, I suggest removing the alternator stator and checking to see if there has been any rubbing. Sometimes foreign matterial can get stuck t...

4 months ago
Reply
RE: Engine Oil

Yes, it appears that it will be fine. It meets Sae standard J-1899. The specs for jabiru engine oils is in the beginning of the maintenance manual, ...

4 months ago
Reply
RE: 3 cold cylinders

If 2 cylinders aren't firing the engine should be running very roughly. Things you can check are; Make sure there is no vacuum leaks on the intak...

5 months ago
Reply
RE: 3 cold cylinders

We haven't received any feedback on if this was the issue with this engine. What engine do you have @type47?

5 months ago
Reply
RE: J430 MTOW

Hello @Airfix430, The envelope gets extended up. The fore and aft limits don't change. And yes the trim system copes ok. And yes a discussion wo...

5 months ago
Reply
RE: J430 MTOW

Hello Serge, Yes all J430's can be upgraded to 760kg. There is some requirements. The wing attachment bolts need to 5/16". And the placards needed...

8 months ago
Reply
RE: Generation 4 pistons upgrade

Hello Peter, The piston upgrade is recommended because it is an exactly that, an upgrade. Early Gen 4 engines used a version of the Gen 3 pistons. ...

9 months ago
Page 1 / 10