Thanks for the rapid reply! I'll check both sides as recommended. Oh, and my the concerns about the clearance of the AN5 being installed to the rear o...

Hello Jabiru support, I installed the propeller on the prop flange and noticed that when I torqued the AN5 hub bolts to 12 ft/lb, the hub halves but...

@jabiru-support Kody did answer me. And many thanks to all the staff at Jabiru. Your level of support is first rate!!

Thanks again for your help Jabiru support. I guess hacking away at the fins, drilling and tapping isn't going to work with these older style heads - p...

Jab support, i apologize for so many posts but I don’t see the ability to upload more than one file. This is a second shot of the head with the plug...

Greetings Jab support, Thanks for the photo. My head appears to be different and does not have that cast “step” directly below the head bolt hole. ...

That's exactly the help I was looking for, thanks!

Short video in flight over the Florida/Georgia border en route to home base in NJ, USA  trim.AB6F2B38-9655-4AB1-9488-9A8AF4663A6A.MOV

Picture of the Aerostar 1  5C95F47C-32B8-4A2F-97F5-C6D574045F63.jpeg

@jabiru-support Please remove my original posts’ links as they do not work and mat have been responsible for recent Google security breach on my Googl...

Sorry, the photo/video links won’t work as it’s a link to my google photo and is not public. I can’t seem to edit this once posted or else they would’...

Hello Jabiru support, Thank you for replying. The 4mm seems the more practical option as one doesn't have to fiddle with the spark plug and proper c...