Last seen: Apr 8, 2024
Sorry about the last reply, it was done at 1:30 in the AM. I ordered part number 4A138B0D-2 from Arion Aircraft. The invoice did not have a "-2" thoug...
I ordered P/No. 4A138B0D-2
Greetings Jab support, I installed the Jab needle and now the engine quits when I add power from idle. It seems as if it's starved for fuel. I'll ma...
Greetings Jab support, What position should I place the Jabiru needle? I assume there are position grooves as in the Bing needle? Thanks in advanc...
@jabiru-support Thanks for the quick reply. Are you suggesting then that I should order the current needle? If it’ll help achieve what I’m trying to...
Just curious on the LLD, no worries. Thanks for the answer on drilling, or not to! Alex R-
Greetings Jab support, Is there any value in drilling the idle circuit inlet aperture to 1.6mm? If so, is there a detailed procedure from Jabiru? Al...
@jabiru-support Jabiru P/No. 4A131A0D-3, according to the bulletin? I assume I can get that in the US?
@jabiru-support According to service bulletin JSB 018-2, my A2200, serial number 22A981 was manufactured before the introduction of the economy kit....
@jabiru-support Thanks. I’ll look to see what style needle was installed. This is the original Bing CV 94 carburetor Jabiru installed on this A2200 ...
@jabiru-support I'm ready to tune the carburetor to a richer mixture but I'm concerned of this newfound vibration (occurred after 15 hours of flight...
@jabiru-support This is what I asked in my similar post. I spoke with Arion and they said they don't sell the Jabiru cold start kit because it "does...
After looking at what Jabiru offers in their website, the heat muffler installed by Aerostar SA is not the same. My guess is that plenum does not hav...
Thanks for the suggestion. It's been bloody cold here in the northeast US which makes this more relevant than ever. Are the cold start coils you menti...
@jabiru-support As always, I appreciate your prompt replies. Does it make a difference which side to remove the grounded shielding on the p lead - a...