Notifications
Clear all
Jabiru Engines
2
Posts
2
Users
0
Reactions
1,700
Views
Topic starter
12/11/2018 7:09 pm
Hi Doug
What is the nominal oil flow (liter/minute) at maximum rpm on a J2200 engine?
What is the recommended minimum inner diameter of hose fittings used with the oil cooler arrangement?
Regards Olav.
19/11/2018 8:28 pm
Hi Olav,
I don't have oil flow figures to hand, but the engine installation manual requires "Hoses should be nominally 10mm (3/8”) bore". Fittings to suit that hose size will obviously have a smaller bore, but ideally not too much smaller. It's not a high pressure system so they don't need to be super-thick.
Regards,
Doug.
