Notifications
Clear all
Topic starter
11/04/2020 1:48 am
I have 50 hours on the engine (22A3827). My oil pressures in cruise run below optimum (37-30). I use aeroshell 100W. I was thinking about adding a washer to the PRV. What are your thoughts?
I also noticed there are two oil pressure relief springs listed for the gen4 engines:
PX4A002D-2 and PX4A002D-3
Is the -3 spring an upgrade for both gen4 engines or specific to one? I have no idea which spring is installed in my engine. Would this spring improve my oil pressure?
Regards,
Tom
This topic was modified 4 years ago 2 times by TomRV12
Topic starter
19/04/2020 4:46 am
Lacking a response from Jabiru I installed a second washer in oil pressure relief valve. I now have normal oil pressure and run close to optimum pressure.
Regards,
Tom
