Notifications
Clear all

Avmap ekpiv

1 Posts
1 Users
0 Likes
1,924 Views
(@jabiru)
Member Admin
Joined: 6 years ago
Posts: 137
Topic starter  

Thread transferred May 2018

Avmap ekpiv    1 year 9 months ago#303

·         Keith Whaley

·         Topic Author

·         Offline

·         Posts: 2

·         

I have an avmap ekpiv in the j160 I recently purchased, when I press go to and select airports I get an information box for an airport in Asia somewhere, how do I get back to the list of airports thanks Keith.

Please Log in or Create an account to join the conversation.

Avmap ekpiv1 year 9 months ago#307

·         Doug Smith

·         

·         Offline

·         Posts: 287

·         

Hi Keith,
I'm a little rusty on the AVMAP so I'm open to ideas... That sounds to me like maybe you have the wrong database or it's seeing the low-res database but not the high res one.
If you look through the list of airports can you find any Australian airports at all?
Going back a long time now but I remember a few AVMAPs that had some issues recognising the card that had the database on it. Sometimes taking the card out and putting it back in cured that... And there were a few where we could copy the map files off the card then back on (overwriting the originals) and that would fix it... But you have to be careful as there's security there and sometimes it won't recognise the card after you do that.

And this was a LONG time ago (remembering that electronics years are life dog years!) now so good chance times have changed.

Getting in touch with the importer might be worthwhile but let us know how you go!
Regards,
Doug.

Please Log in or Create an account to join the conversation.

Avmap ekpiv1 year 9 months ago#309

·         Keith Whaley

·         Topic Author

·         Offline

·         Posts: 2

·         

Thanks Doug, I need to be able to get back to the list of airports from the information box I'm in, can't work out how to do it, the list of airports is there if I can get back to it,or how do I get the unit out of the cradle in the dash so I can take it somewhere to get looked at thanks Keith.

Please Log in or Create an account to join the conversation.

Avmap ekpiv1 year 9 months ago#312

·         Doug Smith

·         

·         Offline

·         Posts: 287

·         

Depends which cradle you have. If it's the folded sheetmetal one then I think you have to unscrew the whole thing off the panel. The plastic one you should be able to push the release on the middle / top.
Regards,
Doug.

Please Log in or Create an account to join the conversation.


   
Quote
Share: