Hole in Jab Scimita...
 
Notifications
Clear all

Hole in Jab Scimitar Propeller


Jabiruyank
(@jabiruyank)
Trusted Member
Joined: 1 year ago
Posts: 51
Topic starter  

Greetings Jab support,

During balancing of the propeller which included applying enamel paint and sanding off excess weight, I encountered the attached on the tip of the propeller. The hole is approximately 1/6” in diameter and approximately 4” deep. Please find out from the factory why there is a hole on my Jabiru scimitar propeller blade. I recall on my previous vibration issue posting in February, Jab support mentioned if there wasn’t a hole in the prop about 1/8” in diameter running the axis, all was good. At the time, I hadn’t discovered it but it’s definitely there now.   

Cheers,

Alex-


Quote
Jabiruyank
(@jabiruyank)
Trusted Member
Joined: 1 year ago
Posts: 51
Topic starter  

I just realized this is posted in the wrong topic and should be in "Propellers"


ReplyQuote
Share: