ae2900249cou
 
ae2900249cou
ae2900249cou
Group: Registered
Joined: 2019-08-14
New Member

About Me

PROFILE
HARDWOOD Marine plywood is an excellent and respected material of extensive aquatic usage, and is also a most controlled timber product for boats up to 20 metres, both racing and pleasure. In addition, it has received wide acceptance in commercial and naval vessels and is also extensively used in commercial fit-out and joinery works. Marine plywood is manufactured with highest face quality on two sides. Veneers are selected because of freedom from defects and peeler checks, as well as high mechanical strength and suitability for permanent bonding. Quality controlled glue line is another important aspect of plywood in a boat. The glue bond must be permanent, and must maintain its strength and durability under the most exposed conditions over the full life of the boat. Phenol formaldehyde resin bonds, achieved under controlled heat and pressure in the hot press, have proved over 50 years of laboratory testing and under extreme exposed conditions to perform without deterioration.

FEATURES
1.species:combi core
2.Glue:
COMBI Marine plywood glue must be the best permanent waterproof, gas-resistant and weather-resistant glue (WBP glue). The glue for outdoor plywood can be the best permanent waterproof and resistant weatherable rubber, or it can be general waterproof and resistant to cooking and weathering adhesive.
3.Grade of wood/backboard (*Note 1)
The face/back plate of COMBI marine plywood must not have any defects (a small amount of needles are allowed). However, for outdoor plywood with a slightly lower grade, defects on some face/back plates (such as dead quilting, quilting, etc.) are allowed (such as C/D grade outdoor plywood).
4.Core board
COMBI Marine plywood: In general, the long middle plate should be a whole piece; if you need to splicing the core board, you can use the vertical spelling method, but you can't use the end spelling method.

DETAILS
Product Species:HARDWOOD
Size:18mmx1220x2440Glue:WBP
Film:BROWNGrammage:180g/㎡
Sr.
No.PropertyUnitTest
MethodValue of
TestResult
1.Moisture Content%EN 32210%Check out
2.Densitykg/cbmEN 323580Check out
3.Bonding
QualityBonding
QualityMpaEN 314Max: 1.37Check out
Min: 0.65
Damage Rate%-----65%
4.Bending
Modules
of
ElastictyLongitudinalMpaEN 3106800Check out
Lateral5200
5.BendingLongitudinalMpa48.3Check out
Strength
N/mmLateral35.7
6.Cycle LifeAbout 6~10 Repeated Using times According
Projectes by formwork Application

IMAGES
Marine Plywood suppliers
website:http://www.chantaplywood.com/construction-grade-plywood/marine-plywood/

Social Networks
Member Activity
0
Forum Posts
0
Topics
0
Questions
0
Answers
0
Question Comments
0
Liked
0
Received Likes
0/10
Rating
0
Blog Posts
0
Blog Comments
Share:

Please Login or Register