Aileron attachment  

  RSS

Vic
 Vic
(@vic)
New Member
Joined: 11 months ago
Posts: 2
24/01/2019 7:22 pm  

Hi, I'm building a J430 and looking at the aileron attachment. Previously there used to be a pre mouled strip like a 'T' cross section that was bonded in the trailing edge and the hinges riveted to the edge of that and the edge of the aileron. I find now that I have a curved moulded section and a curved edge on the aileron. I can't see how you would attache the hinges? The Online manual is April 2010. Is there a later manual as I can see major differences in the brake assembly too with a single twin port caliper in place of the older design but nothing in the build manual

Thanks

 


Quote
Vic
 Vic
(@vic)
New Member
Joined: 11 months ago
Posts: 2
24/01/2019 7:45 pm  

I think I have found the answer. The J230 manual is more up to date and shows the procedure unlike the J450 manual, so I shall have to use both.


ReplyQuote
Share:

Please Login or Register